Best Reciprocating Saw Blade for Pallets of 2026 Top Picks

The LithicApex 25-Piece Reciprocating Saw Blade Set is engineered specifically for users who need dependable cutting performance across heavy-duty renovation and outdoor cleanup tasks. Featuring a 9-inch overall length and a progressive 6/12 TPI tooth pattern, this bulk set targets DIY remodelers, deck builders, framing contractors, and landscape maintenance crews. Reciprocating saw blades are natural wear items, making a 25-blade bundle a practical hedge against frequent hardware store runs during mid-project teardowns.

In practical cutting applications, the variable tooth design stands out by balancing cutting speed and feed control. The aggressive 6 TPI sections assist with rapid material removal in rough outdoor wood and structural framing, while the 12 TPI sections help stabilize the cut through nail-embedded wood, pallet slats, and thin-wall PVC piping. The 9-inch blade length gives you sufficient stroke clearance to slice through thick branches or reach behind drywall to sever wall studs and window framing fasteners.

The build quality relies on a bi-metal composition paired with targeted heat treatment and a protective UV coating. This construction offers the necessary flexibility in the blade body to withstand bending during bind-ups without snapping, combined with hardened tooth tips to endure contact with hidden construction fasteners. Power transfer is straightforward thanks to the standard 1/2-inch universal tang, ensuring immediate compatibility with cordless and corded reciprocating saws from Milwaukee, DeWalt, Makita, Bosch, Ryobi, and other mainstream tool brands.

Jobsite handling and storage are well considered with the inclusion of a dedicated hard-shell case. Rather than loose blades rolling around the bottom of a tool bag, the case keeps the cutting edges organized and protected from moisture. When swapping blades between dirty garden pruning and rough interior demolition, remember to follow standard tool safety by disconnecting the power cord or removing the cordless battery pack before opening the tool's blade clamp.

As with all general-purpose bi-metal reciprocating blades, there are practical boundaries to keep in mind. The 9-inch blade length offers good reach, but it can bend if excessive lateral force is applied when clearing tight plunge cuts. Additionally, the variable 6/12 tooth pitch is designed for speed and teardown rather than clean edges, leaving noticeable tearout on finished lumber. For structural steel or heavy iron pipe, dedicated thick-metal carbide blades remain the better technical choice.

For homeowners managing property maintenance, weekend remodelers ripping out old cabinetry, or contractors taking down fencing, this LithicApex 25-pack delivers a dependable balance of durability, multi-material flexibility, and bulk value. Having two dozen bi-metal demolition blades ready in a sturdy case makes tackling rough cuts and messy cleanups far more efficient.

Each blade in this 25-pack features an industry-standard 1/2-inch universal shank, making it directly compatible with keyless and tool-actuated reciprocating saw clamps across the market. The tang mounts securely in popular brands such as Milwaukee Sawzall, DeWalt, Makita, Bosch, Ryobi, Craftsman, and Hitachi.

Because the tang follows standard reciprocating saw specifications, it works reliably in both compact one-handed reciprocating saws and heavy-duty two-handed demolition tools. Always verify that the tool's clamp mechanism is fully seated and locked around the tang before operating the saw.

The 6/12 variable TPI profile is tailored for diverse cutting scenarios where material density shifts unexpectedly. It easily cuts through framing lumber containing embedded framing nails, wood pallets, PVC drain pipes, vinyl siding, and window framing.

For outdoor property care, the tooth geometry and 9-inch reach provide ample stroke travel for green wood pruning, limb trimming, and roots. While capable of cutting thin sheet metal and light conduits, heavy structural steel cutting will require dedicated metal-specific blades.

These ALEXEX reciprocating saw blades are a 10-pack of 9-inch bi-metal blades with a variable 4/6 TPI, designed for cutting wood, nail-embedded lumber, PVC, and similar materials. They are well-suited for DIY homeowners tackling demolition projects, contractors on job sites, woodworkers, and mechanics who need to cut through metal or composite materials.

The bi-metal construction with 8% cobalt and a non-stick coating is intended to extend blade life and reduce friction. The alternating tooth geometry helps produce cleaner cuts with less vibration, which can improve control and reduce user fatigue during extended use. According to the product description, these blades offer up to 5 times longer cutting life than standard blades, making them a practical choice for rough-in work and demolition.

The blades feature a unique tip design for faster plunging into materials, and the 4/6 TPI allows for efficient cutting of both wood and metal. They are compatible with most corded and cordless reciprocating saws, so you can use them with your existing tools. The 10-pack provides a good supply for frequent use, and the blades are lightweight at about 0.78 pounds per pack, making them easy to carry in a toolbox or job site bag.

Storage is straightforward since these blades come in a simple pack; you may want to organize them in a blade case or drawer. No special maintenance is required beyond keeping them clean and dry to prevent rust. The non-stick coating also helps reduce buildup of pitch and resin during cutting.

One limitation is that the product currently has no customer reviews, so the claimed longevity and performance are based on specifications rather than verified user feedback. Additionally, while the 4/6 TPI is versatile, it may not be the best choice for very thin metal cutting where a higher TPI is preferred. For heavy professional use, some users might prefer more established brands with proven track records.

Overall, these ALEXEX blades appear to be a solid value for DIYers, contractors, and tradespeople who need a reliable set of blades for mixed material cutting. If you're looking for an affordable 10-pack of bi-metal blades that can handle nail-embedded wood and general demolition, this set is worth considering. As always, it's a good idea to try a few blades to see how they perform with your specific saw and cutting habits.

If you are looking for a versatile set of reciprocating saw blades that can handle a variety of cutting tasks around the home, workshop, or jobsite, this kit from B0CSYHKQJW is worth a closer look. Designed to fit most major reciprocating saw brands, these blades are intended for cutting wood, metal, and demolition materials, making them a practical addition to any tool collection.

This blade set is well-suited for DIY homeowners tackling weekend projects, mechanics cutting through exhaust pipes or brackets, contractors performing rough-in work, and woodworkers needing quick cuts in lumber. The assortment includes blades with different tooth configurations, allowing you to switch between materials without needing to buy separate packs. For general renovation, construction, or even plumbing repairs, this set provides a solid starting point.

In terms of real-world performance, the blades are designed to deliver efficient cuts with minimal effort. The precision-ground teeth help maintain a straight cutting line, which is especially helpful when working with metal or thick wood. While they may not be as aggressive as specialized blades for heavy demolition, they hold up well for most common cutting tasks and offer a good balance between speed and blade life. Users can expect reliable cutting performance for jobs like pruning branches, cutting PVC pipe, or trimming lumber.

Build quality appears to be a focus here, with blades constructed from durable materials that resist wear and corrosion. The universal shank ensures a secure fit in most reciprocating saws, reducing blade wobble and improving cutting accuracy. The included storage case is a nice touch, keeping the blades organized and protected when not in use. It fits easily into a toolbox or can be stored on a shelf, making it convenient for both workshop and jobsite use.

One realistic limitation to consider is that the set may not include specialized blades for very heavy-duty demolition or for cutting extremely hard metals. Users who frequently tackle intense demolition work might prefer to supplement this set with a few heavy-duty blades. Additionally, the storage case, while functional, may not withstand rough handling on active construction sites as well as a more rugged case would.

Overall, this reciprocating saw blade set offers a practical and cost-effective solution for anyone who needs a versatile cutting tool kit. It is a smart choice for DIYers, mechanics, contractors, and workshop users who want a reliable assortment of blades that can handle a wide range of materials. For the price, it provides good value and is likely to meet the needs of most general cutting applications.

The BENESOON 10-piece reciprocating saw blade set is designed specifically for pallet dismantling, warehouse reclamation, and demolition work where blades frequently encounter embedded metal. Breaking down wooden shipping pallets and reclaimed crates is notoriously hard on standard wood-cutting blades because hidden nails, spiral fasteners, and metal banding quickly strip standard teeth. This set offers a targeted solution for recyclers, logistics workers, framers, and DIY makers who salvage pallet wood for shop projects.

At the core of these blades is a bi-metal construction that combines wear-resistant high-speed steel (HSS) teeth with a flexible spring-steel back. This composition gives the cutting edge the hardness needed to sever steel nails, aluminum alloy tubing, and metal strapping, while the ductile body flexes under torsional stress instead of snapping. The 10/14 variable teeth-per-inch (TPI) configuration provides a middle ground between aggressive chip removal in timber and controlled cutting through metal, reducing tool vibration and blade binding when moving from soft pine or oak stringers directly into hardened pallet fasteners.

Measuring 9 inches in total length, these blades provide substantial cutting reach. When dismantling pallets, standard 6-inch blades often fall short, forcing users to attempt cuts from multiple angles or risk bottoming out the blade shoe. The extended 9-inch profile allows operators to slice straight through stacked boards, runners, and stringers in one continuous motion. Additionally, the wavy tooth set geometry creates clearance behind the cut line, facilitating chip evacuation and reducing blade pinch between tight deck boards.

Organization and transport are supported by an included rigid storage case, which prevents loose blades from rattling around in tool bags or damaging other equipment. In terms of maintenance and handling, the manufacturer notes that these blades reach high surface temperatures during heavy metal demolition and should be allowed to cool before touching or swapping. Proper disconnect of power or removal of the reciprocating saw battery is always recommended when replacing blades.

A realistic limitation of this set is its strict material boundary. The manufacturer explicitly advises against using these blades on brittle surfaces like plaster, glass, ceramic, or concrete, as well as tough alloys like stainless steel. Using them outside their intended envelope of nail-embedded wood, aluminum tubing, and mild metal banding will rapidly wear the cutting edge. Within its defined scope, however, this set offers dependable cutting endurance and great value for high-volume pallet teardowns and structural demolition.

The BENESOON pallet dismantling blades are engineered for mixed-material cutting applications commonly found in logistics, recycling, and lumber reclamation. Supported materials include wood containing embedded nails, light metal banding, framing fasteners, and thin-walled aluminum alloy tubing. The 10/14 variable tooth pattern balances the rapid chip clearance needed in porous wood with the controlled tooth engagement required for shearing through nail shanks.

These blades are not universal demolition blades for masonry or abrasive surfaces. They are not intended for use on concrete, tile, stone, glass, plaster, or stainless steel materials. Operating these bi-metal teeth on masonry or hardened stainless components will quickly dull or destroy the high-speed steel cutting edge.

Tackling teardowns, rough framing alterations, or pallet dismantling requires cutting accessories that can take severe abuse without snapping or dulling immediately. The EXMIATOV 25-Pack 9-Inch Reciprocating Saw Blades are designed specifically for heavy rough-in jobs where hidden nails, screws, and composite materials frequently ruin standard wood-cutting blades. This bulk pack is well matched for remodeling contractors, framing crews, plumbers, electricians, and active DIY homeowners who need a dependable supply of demolition blades on hand.

The performance of these blades centers on their variable 6/12 TPI (teeth per inch) configuration. This dual tooth pattern gives you the fast stock removal of a low tooth count combined with the smooth cutting and snag resistance of a higher tooth count. When cutting into nail-embedded 2x4 studs, old fencing, or pallet boards, the teeth clear chips quickly while chewing through steel nails without sudden binding or tooth stripping. Beyond timber, the geometry effectively manages rigid plastics like PVC conduit and light-gauge sheet metal.

Durability under high friction is critical for reciprocating blades. The product description highlights an M42 bi-metal construction, engineered to maintain tooth hardness even as heat builds up during heavy demolition. With a body thickness of 0.05 inches (1.27 mm), these blades are noticeably more rigid than standard thin-kerf alternatives. This added heft keeps the cut straighter, reduces blade chatter, and helps prevent the blade from folding over when you bear down during flush-cutting applications.

Jobsite practicality is another strong suit. Featuring a universal tang, these blades fit seamlessly into tool-less chucks from major power tool brands. Having 25 blades packaged inside a dedicated clear organizer case resolves the common problem of loose blades rolling around in a tool bag or bottom drawer. The case protects the cutting teeth from premature damage and keeps your workspace or truck bed tidy.

Keep in mind that these blades are optimized for speed and resilience rather than clean finishes. The aggressive 6/12 TPI design leaves rough edges, making it unsuited for precision woodworking or delicate trim. In addition, while the 9-inch reach is ideal for deep plunge cuts and wide framing members, working inside tight stud bays or confined crawlspaces may call for a shorter 6-inch blade to avoid hitting adjacent obstacles.

For anyone managing aggressive tear-outs, deck removals, fence repairs, or general rough framing, this 25-piece bi-metal set offers practical cutting endurance and outstanding value. The balance of heat-treated M42 steel, heavy blade stock, and dedicated organization makes it a sensible addition to any jobsite gang box or home workshop.

On an active remodeling or demolition jobsite, reciprocating saw blades are treated as high-wear consumables. Striking drywall screws or hardened framing fasteners can instantly ruin a standard carbon steel blade. By utilizing high-speed M42 bi-metal teeth joined to a flexible spring steel backing, these blades absorb shock and withstand accidental impacts with fasteners without shattering.

The included storage case is particularly beneficial for commercial trades. Instead of digging through a chaotic toolbox tray for a sharp blade, contractors can quickly grab an organized set from their service vehicle. The 9-inch format gives ample clearance when sawing through layered wall assemblies, subfloors, and thick plastic drainage piping.

The ALEXEX 25-Pack 12-Inch 4/6 TPI Reciprocating Saw Blades are heavy-duty cutting accessories engineered for rough-in demolition, outdoor trimming, and demanding teardown tasks. Positioned as a direct bulk alternative for standard 12-inch demolition blades such as the DS1212BW25 pattern, this set is aimed at contractors, framing crews, pallet recyclers, and ambitious DIY remodelers who burn through blades quickly and need dependable cutting reach without spending a premium on individual name-brand packs.

In practical cutting scenarios, the extended 12-inch blade length gives users the reach needed to slice through multi-ply framing lumber, heavy landscape timbers, large PVC drainage pipes, and thick tree limbs. The tooth geometry utilizes an alternating 4/6 variable teeth-per-inch (TPI) layout. This variable pitch helps break up harmonic chatter and reduces tool vibration compared to coarse fixed-pitch blades, while maintaining large enough gullets to eject wood chips rapidly from wet lumber, pallets, and composite materials.

Durability is anchored by a bi-metal construction enriched with 8% cobalt along the cutting edge. This metallurgy allows the teeth to withstand the high thermal stress of striking hidden nails, screws, and structural fasteners without immediately shearing off. A distinctive red non-stick coating coats the blade body to help minimize friction, pitch accumulation, and heat transfer during prolonged rough cuts. Additionally, the tip features an aggressive plunge-cut profile designed to help users initiate pocket cuts in subfloors, roof decking, or wall sheathing.

Blade mounting follows the universal reciprocating saw tang configuration, making these blades compatible with tool-free blade clamps on corded and cordless saws across major tool ecosystems. Handling a 25-pack on the jobsite is practical, providing an ample reserve so users can swap out dulled blades immediately without interrupting workflow. Routine blade changes simply require releasing the saw blade clamp following the tool manufacturer safety guidelines, inserting the shank fully, and verifying solid retention before cutting.

There are natural trade-offs inherent to a 12-inch rough demolition blade. Because of the long blade length, thinner stock or aggressive pressure can cause noticeable blade deflection or bending, requiring the operator to let the tool speed do the work. Furthermore, the aggressive 4/6 TPI tooth pattern produces torn, rough kerfs that require significant cleanup if used anywhere near visible trim. These blades are strictly intended for fast material separation, not refined woodworking or precise joinery cuts.

For remodelers, roofers, landscapers, and homeowners facing extensive teardowns, pallet breakdowns, or tree limb clearing, the ALEXEX 25-pack offers an efficient balance of durability and bulk economy. The combination of 8% cobalt bi-metal construction, friction-reducing coating, and universal saw compatibility makes this set a practical cutting consumable for any heavy demolition toolkit.

These ALEXEX reciprocating saw blades are specifically configured for rough-in applications where encountering mixed materials is common. The variable 4/6 TPI tooth configuration provides optimal bite in nail-embedded dimensional lumber, framing studs, plywood subflooring, and wooden shipping pallets without binding on common fasteners.

Beyond structural timber, the blades are rated to cut rigid PVC pipes, plastic composites, and outdoor garden branches during seasonal pruning. While capable of chewing through nails and light structural demolition hardware embedded in wood, they are not designed for cutting thick structural steel plates or solid rebar, where specialized high-TPI metal-cutting blades remain the correct choice.

The DEWALT DW4898 is a 10-piece bi-metal reciprocating saw blade set that covers a range of common cutting jobs. It includes blades from 6 to 9 inches, making it suitable for wood, metal, and general demolition work. This combination set is designed for DIY homeowners, mechanics, contractors, electricians, plumbers, woodworkers, and construction professionals who need a versatile blade selection ready at hand.

Performance-wise, the bi-metal construction gives these blades good flexibility while maintaining a sharp cutting edge that lasts through multiple uses. According to product specifications, the heat-treated steel resists wear and breakage, so you can cut through nails, thin metal, wood, and even some pipe materials without frequent blade changes. The set is meant to improve productivity on job sites where switching between materials happens often.

Build quality is typical of DEWALT accessories: the blades feel solid, with laser etching for size and material type. The included plastic case is a strong point - it keeps blades organized and secure, and it's sized to fit inside larger tool boxes or power tool kit boxes. This makes storage and transport much easier, especially for tradespeople who keep multiple saw blades on hand.

One practical limitation is that this set is optimized for general use, not for specialized tasks. If you only cut thick steel or thick hardwood frequently, you may want a dedicated set with more aggressive teeth. The case, while convenient, is plastic and could crack under very rough handling. Also, some users might prefer a case with individual slots for each blade to prevent rattling.

For most garage users, workshop enthusiasts, and professionals, this set offers good value. It's a reliable starting point for anyone who needs a selection of blades for a reciprocating saw. The DEWALT DW4898 is a practical choice that balances versatility, durability, and organization for everyday cutting jobs.

The DEWALT DW4898 blades are made from bi-metal - a high-speed steel edge welded to a flexible back. This construction gives the blades ability to withstand bending without breaking while keeping a sharp edge for longer cuts. The teeth are precision-ground for consistent cutting performance. Each blade features a 1/2-inch universal tang that fits most reciprocating saws. The yellow coating on some blades helps reduce friction and corrosion. The included case is molded plastic with a clear top and snap closure, holding the blades in place securely. While not heavy-duty, it offers acceptable protection for everyday use.

This 10-piece set is designed to cover a variety of materials encountered in home remodeling, construction, and automotive work. With blades ranging from 6 to 9 inches, you can cut through wood, lumber with nails, PVC, drywall, thin metal, and even some light steel. The set includes blades with different tooth patterns: for wood cutting, for metal, and for demolition. For DIYers, it means one purchase for most reciprocating saw projects. For contractors, it's a convenient backup set to keep in the truck. The blades work well for plumbing cuts, electrical box openings, and tree trimming as well. Just be aware that for heavy-duty metal beam cutting or extensive hardwood ripping, you might need a more specialized blade.

The THYENTUL 9-Inch 10/14 TPI Bi-Metal Reciprocating Saw Blade 10-Pack is designed for users who frequently tackle mixed-material demolition, pallet dismantling, and rough property maintenance. Instead of dedicating separate blades to wood and thin metal, this set uses a variable tooth profile to handle fast material transitions. DIY remodelers, pallet upcyclers, and homeowners looking for an accessible multi-use reciprocating saw accessory pack will find these blades well suited for general utility work.

A primary feature of these blades is the 10/14 TPI gradient tooth arrangement. Variable-pitch teeth help reduce vibration during cuts by breaking harmonic resonance, allowing the blade to bite into nail-embedded 2x4s, metal conduit, or pallet fasteners with equal ease. At 9 inches in length, the blade provides plenty of stroke depth to clear pallet blocks and slice through larger tree limbs during seasonal yard pruning without binding early in the stroke.

Material durability comes from a bi-metal build, which fuses high-speed steel cutting teeth to an elastic spring steel back. This combination helps the blade withstand deflection and sudden shocks from hidden nails or hard knots that might otherwise shatter brittle high-carbon blades. Measuring approximately 8.98 inches by 0.75 inches, the blade body maintains enough structural presence for demolition while staying slim enough to fit between closely spaced pallet boards.

Using these blades effectively comes down to matching the tool to the task. Before changing blades or clearing bound material, always disconnect the reciprocating saw from its power cord or remove the battery pack according to the tool manufacturer guidelines. Having ten blades in a pack means you can swap to a fresh cutting edge as soon as wear slows down progress, keeping your tool running cool and your cutting pace consistent across large cleanup jobs.

There are practical limitations to keep in mind. A 10/14 TPI general-purpose profile prioritizes cutting speed and multi-material versatility over smoothness, so cuts through lumber will have rough, splintered edges unsuitable for finished carpentry. Additionally, because the blade is 9 inches long, applying heavy lateral pressure or forcing deep plunge cuts into thick steel can cause the blade to flex or wander off the cut line.

For homeowners and hobbyists seeking an affordable supply of rough-cut blades for pallet teardowns, fence repairs, and branch trimming, the THYENTUL 10-pack delivers practical cutting utility. If your projects involve destructive remodeling or quick outdoor property cleanup rather than fine joinery, this multi-purpose blade set is a sensible addition to your tool bag.

The 10/14 TPI inverter tooth configuration bridges the gap between coarse wood-cutting blades and fine metal-cutting blades. Coarser sections clear sawdust efficiently, while the tighter tooth spacing bites into metal fasteners and pipes without snagging aggressively, making it well matched for pallet disassembly and nail-embedded lumber.

While the specifications indicate a general-purpose reciprocating saw blade format, buyers should verify fit with their specific reciprocating saw clamp before beginning work. Standard reciprocating saw blade holders typically accommodate standard tang profiles, but consulting your tool documentation ensures secure clamping and safe operation.

The ALEXEX 25-pack 6-inch 8/12 TPI reciprocating saw blades are engineered specifically as general-purpose demolition and remodeling accessories. Built with a variable tooth pitch and a bi-metal composition containing 8 percent cobalt, these blades focus on rapid material breakdown. They are well-suited for general contractors, remodelers, framers, plumbers, and DIY homeowners who regularly deal with messy tear-outs, pallet breakdown, or rough structural adjustments.

Cutting performance centers on the alternating 8/12 TPI variable tooth profile. This setup reduces harmonic vibration during aggressive cuts while maximizing chip clearance in softwoods and dense framing lumber. The sharp plunge tip assists in starting cuts directly into floorboards, drywall, or wall sheathing without requiring pre-drilled pilot holes. Based on product specifications, the non-stick coating helps resist pitch gumming from pressure-treated lumber while mitigating heat buildup around embedded fasteners.

Build quality relies on a heavy-duty bi-metal construction designed to resist premature tooth shear when striking hidden fasteners. Striking nails, staples, or drywall screws is inevitable during demolition work, and the reinforced tooth geometry is engineered to handle intermittent contact with soft metals without immediately blunting the edge. The heat-treated body provides enough flex to resist snapping during binds while maintaining sufficient rigidity to prevent excessive blade deflection.

Operating these blades is straightforward thanks to the standard universal half-inch tang. The shank locks securely into quick-release toolless chucks across major reciprocating saw platforms including Milwaukee, DeWalt, Makita, Bosch, and Ryobi. With twenty-five blades included in the bulk pack, tradespeople can keep several spares tucked into a jobsite bag or portable tool organizer without worrying about burning through expensive single blades on gritty demolition tasks.

While versatile for rough teardowns and general utility cuts, these 6-inch blades have realistic boundaries. The 6-inch length limits total depth of cut compared to 9-inch or 12-inch pruning and beam-cutting blades. In addition, while they handle soft metals, structural nails, and thin-gauge piping, they are not intended for heavy structural steel, thick cast iron, or hardened high-tensile bolts, which require specialized carbide-tipped blades.

For workshop users, property managers, and framing crews who need a reliable, cost-effective supply of demolition blades, this set delivers practical utility. The bulk format ensures you have plenty of sharp edges on hand to push through deck removals, plumbing cutouts, and window framing projects without breaking the tool budget.

On active construction and remodeling jobsites, cutting accessories take serious punishment. These blades are designed to tackle nail-embedded 2x4s, subflooring, wooden pallets, and PVC drain pipes without skipping a beat. The variable pitch allows the blade to transition smoothly from wood into framing nails without binding the reciprocating saw.

Because demolition work quickly dulls cutting teeth on grit and plaster, having a bulk pack on hand prevents project delays. Workers can swap in a fresh blade the moment cutting speed decreases, maintaining productivity throughout full shifts on the jobsite.

These blades feature a standardized half-inch universal shank that fits virtually all modern reciprocating saws on the market. Whether you run 18V or 20V cordless models or high-amp corded saws from brands like DeWalt, Milwaukee, Makita, Ridgid, or Porter-Cable, the shank locks in securely.

The shank design works seamlessly with both keyless twist-collar chucks and lever-action blade clamps, making blade changes quick and hassle-free even when wearing heavy work gloves.